ETM SERIES
The ETM series is equipped with state of the art technologies meant to bend with or without mandrel tubes and profiles, and capable of bending both in right and left direction. The range in diameter is from 1/2 inch up to 3 inches and can make curves over 180° with top finish quality for a minimum bending radius of 3 x the tube diameter.
Thanks to our new “Digital Bend Programming Touch Screen”, these machines are extremely easy to use: it enables selection of up to 99 programs each of them with a 5-stop sequence in the bending operation with automatic adjustment for material springback. Moreover, it can also save and store each project as a repeatable program.
ROTARY COMPRESSION BENDERS
Carell Corporation is proud to be a National Distributor of Pedrick Rotary Compression Benders!
Pedrick Tool & Machine Co. founded in 1875 in Philadelphia,PA, developed our line of rotary compression bending machines for shipbuilding, petro-chemical, industrial and maintenance applications worldwide using the most advanced materials and components in machine construction for bending heavy wall tube, pipe and structural sections. The line includes 12 models to serve all budgets and applications.
Bends produced on a 3D bend radius meet American Petroleum Institute (API) specifications for ovality (flattening) and wall thinning.
THE CONCEPT:The Rotary Compression Bending Principle uses a stationary forming die and a powerful wiper arm that rotates around the die which pulls the work piece around the die to create the bend. The wiper arm locks into the rotating top plate. A variety of structural, roll formed and extruded sections can also be formed using the rotary compression process saving time and money!
STANDARD EQUIPMENT: These Pedrick machines have a work surface and rotating top plate in heavy normalized steel plate mounted on a solid cast or alloy steel base frame. The bending arm is powered by an electric self braking, brushless SEW-Eurodrive right angle motor reduction unit mounted under the table. Bend cycle is controlled by a reversing contactors, motor overload protection modules and a control transformer, all which meet NEC, JIC and UL specifications. Switchgear is enclosed in a NEMA style cabinet complete with an external, Lock-Out/Tag-0ut fused disconnect. Adjustable limit switches and hand held controls are standard.
• Mechanically driven. (No hydraulics or
pneumatics are used to bend pipe or tube)
• Heavy Duty Cast Iron or Steel Housing
• Helical Bevel Gear Reducer
with a TEFC Motor & Brake
• Heat Treated Alloy Shafts
• Spherical Roller Bearings
• NEMA 12 Control Box Meets NEC JIC Specs
• Limit Switch For Angle Selection and
Automatic Reverses
Advantages:
• Quick tool changeovers
• Adjustable limit switches
• Requires minimal maintenance
• 12 Models and Portable units available!
Options:
• Tooling is optional and quoted according
to production needs
• Digital controls are optional to substitute
manually adjusted limit switches
• Machine Voltages can be arranged for any
country or electrical grid.
Machines are shipped direct from our facility to your location after extensive testing
by our factory trained mechanics
UNI SERIES TUBE & PIPE BENDERS
Mandreless Models: UNI-42 UNI-60 UNI-63 UNI-70/C UNI-76 UNI-89
Rotary Benders built for durability, constructed in steel yet economically priced and designed with compact footprints, quick change tooling system and are digitally programmable for precision repeatability.
UNI-42 BENDER 3/4"
Mandreless Rotary Tube & Pipe Bender
Digitally Store 9 Programs with up to 9 Bends Each
Single Speed Bending
Electric Powered Rotary Drive, 220V, Single Phase Only
OPTIONS
Tube & Pipe Tooling and Kits, Plane of Bend Positioners
UNI-60 BENDER 1-1/2"
Mandreless Rotary Tube & Pipe Bender
Digitally Store 9 Programs with up to 9 Bends Each
Single Speed Bending
Electric Powered Rotary Drive, 220V, Single Phase Only
OPTIONS
Tube & Pipe Tooling and Kits, Plane of Bend Positioners, Mandrel Kit for Low Volume Mandrel Bending, Tight Radius Accessories
UNI-60 Combi-Cal 1-1/2"
Mandreless Rotary Draw & Roll Bender
Digitally Store 9 Programs with up to 9 Bends Each
Single Speed Bending
Electric Powered Rotary Drive, 220V, Single Phase Only
OPTIONS
Tube & Pipe Tooling and Kits, Plane of Bend Positioners
UNI-63 BENDER 1-1/2"
Mandreless Rotary Tube & Pipe Bender
Digitally Store 50 Programs with up to 9 Bends Each
Dual Speed Bending
Electric Powered Rotary Drive, 220/460V, 3 Phase
OPTIONS
Tube & Pipe Tooling and Kits, Plane of Bend Positioners, Mandrel Kit for Low Volume Mandrel Bending, Tight Radius Accessories
UNI-70/C BENDER 2"
Mandreless Rotary Tube & Pipe Bender
Digitally Store 50 Programs with up to 9 Bends Each
Dual Speed Bending
Electric Powered Rotary Drive
2 Drive Arbor Sizes Supplied
UNI-76 BENDER 2-1/2"
Mandreless Rotary Tube & Pipe Bender
Digitally Store 50 Programs with up to 9 Bends Each
Dual Speed Bending
Electric Powered Rotary Drive
3 Drive Arbor Sizes Supplied
OPTIONS
Tube & Pipe Tooling and Kits
Tight Radius Accessories
UNI-89 BENDER 3"
Mandreless Rotary Tube & Pipe Bender
Digitally Store 50 Programs with up to 9 Bends Each
Dual Speed Bending
Electric Powered Rotary Drive
3 Drive Arbor Sizes Supplied
OPTIONS
Tube & Pipe Tooling and Kits
Tight Radius Accessories
UNI-70HC BENDER 1-1/2 "
Mandrel Type Rotary Tube & Pipe Bender
Digitally Store 50 Programs with up to
9 Bends Each
Hydraulic Clamps, Programmable
Hydraulic Mandrel Extraction, Programmable
OPTIONS
Mandrel Bending Tooling & Accessories
Mandrel Bed Lengths
from 5’, 8’, 11’, 15’ & 18’
UNI-80 BENDER 2 "
Mandrel Type Rotary Tube & Pipe Bender
Digitally Store 50 Programs with up to
9 Bends Each
Hydraulic Clamps, Programmable
Hydraulic Mandrel Extraction, Programmable
Dual Speed Bending, Electric Powered Rotary Drive
OPTIONS
Mandrel Bending Tooling & Accessories
Mandrel Bed Lengths
from 5’, 8’, 11’, 15’ & 18’
UNI-90 BENDER 2-1/2 "
Mandrel Type Rotary Tube & Pipe Bender
Digitally Store 50 Programs with up to
9 Bends Each
Hydraulic Clamps, Programmable
Hydraulic Mandrel Extraction, Programmable
Dual Speed Bending, Electric Powered Rotary Drive
OPTIONS
Mandrel Bending Tooling & Accessories
Mandrel Bed Lengths
from 5’, 8’, 11’, 15’ & 18’
