Carell Corporation provides superior quality "slip rolls", "initial pinch rolls" and three roll plate rolls. Where the bending sequence is performed by "pinching" the flat sheet between two counter-opposed rolls while the third offset roll or "bending roll" moves upward to contact and bend the sheet. Extraction methods are equipped with either forward tilting, a releasing top roll or a removable end yoke. They are generally designed for lighter capacity applications that makes a cost effective solution to your production!
Click Image, Links or Scroll Down for descriptions, standard equipment, options & technical specifications
Shown with Optional
LED Readout
20 Ga to 1/4" • 3' to 6' Long
20 Ga to 3/8" • 3' to 10' Long
We manufacture and stock; tools for bending, tube rolls, pipe rolls, special tooling and custom tooling. We also carry the following brand names
Parmigiani, Comac, Memoli, Omcca, Simasv, Isitan, Icaro, Offmer & More!
RM & HRM SERIES
3 ROLL, SINGLE INITIAL PINCH PLATE ROLLS
RM Series
STANDARD FEATURES
-
RM Models have manual adjustment of the lateral bending roll via single hand wheel and precision worm drive jack screw boxes.
-
Lateral bending roll can be mechanically tilted for cone rolling.
-
LED Readout to monitor the position of the lateral bending roller
-
Hardened & polished rolls
-
Cone device and rod grooves are standard and identical to HRM Series models.
HRM Series
STANDARD FEATURES
-
Lateral Roll is HYDRAULIC actuated from the control console with joystick controlled tilting action for rolling cones. Roll is idle in rotation and has 3 round rod grooves
-
LED Readout to monitor the position of the lateral bending roller
-
Induction Hardened and Polished Surfaces on all 3 rolls
-
Cone Rolling Device for rolling conical shapes
-
Both Upper and Pinch rolls driven by electric motor and oil bath speed reducer through NiCrMo solid stock gears
-
Pinch Roll Pressure adjustment via ergonomic easy adjust cam lever
-
Lateral Quick Release Top Roll with safety lock
-
24V Low voltage controls, Foot Pedal Rotation, E-Stop, Safety Trip Wires, Instruction Manual
RM & HRM SERIES SPECIFICATIONS
IRM SERIES
3 ROLL, SINGLE INITIAL PINCH PLATE ROLLS
CARELL IRM SERIES units are 3 roll, single initial pinch plate bending machines with powered rotation of both top upper and lower pinch roll.
Choice of 10 models from 3' to 8' long in 14 Gage to 3/16" capacities.
Suitable for medium to low production runs, Affordable & Efficient!.
IRM SERIES STANDARD FEATURES
-
Both Upper roll and Central Pinch rolls driven by electric motor and oil bath speed reducer through NiCrMo solid stock gears
-
Base in steel, electro-welded and cast steel shoulder frames, all stress relieved
-
Lateral roll, idle in rotation with manual up/down adjustment via single hand-wheel
-
Central pinch roll adjustable manually via single hand-wheel
-
Front quick release top roll with rotation lock out safety switc
-
Lateral roll movement via electric motor and heavy duty worm gear drive for precise positioning and maximum power
-
Cone rolling device is standard equipment
-
Lateral bending roll and pinch roll incline for cone working
-
Low voltage push button controls and foot pedals for rotation control w/ E-Stop
-
Multi point safety system including circumferential trip wire
-
Manual forced lubrication
-
Instruction manual
-
Wire / rod grooves on pinch roll and lateral bending roll
IRM SERIES OPTIONS
-
Induction hardened and polished rolls
-
LED Digital Readout
-
Powered Lateral Bending Roll Adjustment up/down
IRM SERIES SPECIFICATIONS
TSI SERIES
POWERED INITIAL PINCH PLATE ROLLS
STANDARD FEATURES
-
Frames heavy solid steel alloy sheet, CNC machined and stress relieved
-
Lateral roll, idle and moving on roller bearings
-
Pinch roll positioning via heavy duty screw jacks with single manual hand wheel
-
Manual drop end top roll yoke (w/ lock out safety switch and set lock)
-
Lateral roll movement via precision heavy duty worm gear and manual wheel crank or optionally powered up/down by efficient drive train system
-
Lateral bending roll is adjustable in incline for cone rolling
-
Bending & pinch roll equipped with analog digital counters for repeat reference position
-
Low voltage foot pedal stand for CW/CCW rotation with E-stop palm button
-
Multi point safety system including circumferential trip wire
-
Illustrated Instruction manual w/ electrical schematics
The Carell TSI Series
is a 3 roll, single initial pinch plate bending machine with precision adjustment of lateral bending roll and powered rotation of upper and lower pinch rolls using high efficiency motor/reduction unit. They are designed to work with 16 GA x 48” wide material in capacity.
FIVE YEAR
Limited Frame
Warranty!
Shown with Optional LED Readout
NOTE: With Optional LED Readout and/or Optional Powered Bending Roll, machine controls are push buttons on a mobile console in lieu of foot pedals.
TSI SERIES SPECIFICATIONS
HTSI SERIES
3 ROLL HYDRAULIC INITIAL PINCH PLATE ROLLS
The CARELL HTSI SERIES unit is a 3 roll, single initial pinch plate bending machine with powered adjustment of lateral bending roll and powered rotation of upper and lower pinch rolls.
STANDARD FEATURES
-
Both Upper roll and Central Pinch rolls driven by electric motor and oil bath speed
reducer through NiCrMo solid stock gears -
Base in steel, electro-welded and stress relieved
-
Lateral roll, idle and moving on roller bearings
-
Central pinch roll pinch pressure adjustable by precision worm gear movement
-
Front quick release top roll with rotation lock out safety switch
-
Lateral roll movement via electric motor and heavy duty worm gear drive for precise
positioning and maximum power -
Lateral bending roll and pinch roll incline for cone working
-
Low voltage push button controls via mobile control console
-
Multi point safety system including circumferential trip wire
-
Forced central lubrication system with pump and tank
-
Instruction manual
HTSI SERIES SPECIFICATIONS
MRM-H SERIES
3 ROLL HYDRAULIC INITIAL PINCH PLATE ROLLS
Carell MRM-H Series are Fully Hydraulic 3 Roll Initial Pinch Plate Rolls with HYDRAULIC
bending roll, pinch roll & drop ends
MRM-H SERIES STANDARD FEATURES
-
Lateral Roll is HYDRAULIC actuated from the control console with joystick
-
controlled tilting action for rolling cones. Roll is idle in rotation (Round Rod Grooves Optional)
-
2 LED Readouts to monitor position of bending & pinch rolls
-
Induction Hardened & Polished Surfaces on all 3 rolls
-
Cone Rolling Device for rolling conical shapes
-
Both Upper and Pinch rolls driven by electric motor and oil bath speed reducer through
-
NiCrMo solid stock gears
-
Pinch Roll Pressure adjustment via push buttons
-
Hydraulic Drop End for quick and easy removal of the work piece
-
24V Low voltage Push Button Controls, E-Stop, Safety Trip Wires, Instruction Manual
OPTIONS: Rod Grooves, Lateral & Overhead Material Supports, Variable Speed, 2 Speed
Rotation, Custom Lengths and Dedicated Configurations
MRM-H SERIES SPECIFICATIONS
MRM-S SERIES
Powered 3 ROLL INITIAL PINCH PLATE ROLLS
MRM-S Standard Features
-
This mechanical model is designed for light to medium jobs. It is used in jobs up to 10 mm thickness materials. It is used in Aluminium Bendings, Air Conditioning Channels, Advertising
-
Panels and Sheet Metal Covers.
-
All models are planet reducer driven
-
SAE 1050 (CK 45) Quality Certificated Steel Rolls with high tensile strength
-
Steel Welded Main Frames
-
Mechanical manual openable dropend
-
Mobile Control Panel
-
Conical Bending Device
-
Central lubrication system
-
Top roll support system and with planetary reducer
-
Precision Bending with Brake Motor
-
Motorised Adjustment of Back Roll
-
Built according to EC Safety Directives (CE certificate)
-
User’s manual
.
.jpg)
CALL ONE OF OUR SALES & APPLICATION ENGINEERS FOR DETAILED
INFORMATION AND PRICING